It’s your word vs theirs unless...
Introducing:
The Rove R2-4K
Ultra High-Quality Dashcam
for Smart Drivers

4K Ultra HD
Recording
Built-in
WiFi
Built-in GPS
Features with state of the art technology
100% USA-Chicago based Customer-Centric & Customer Care
4K Ultra HD Recording
Built-in WiFi
Built-in GPS
Features with state of the art technology
100% USA-Chicago based Customer-Centric & Customer Care

Summer Super Deal Ends In:
ROVE R2-4K SD Card Bundle
Get a FREE 128 GB PRO SD Card!
Recommended By:
ROVE’S Limited-Time Offer
Get All of This & Save $30 Today!


360° Suction Mount

360° 3M Sticky Mount

Quick Start Guide

12ft USB Type-C Power Cable

2.5ft USB Type-C Data Cable

Dual USB Car Charger

Invisible Electrostatic Film for 3M Sticky Mount

5x Cable Hiding Clip & Car Wire Trim Tool 2x Wet Cleaning Pads

128 GB SD Card

Summer Super Deal Ends In:
A Dash Cam made For All
Whether you drive for fun, work, or, travel - this is for you.

Crystal Clear 4K Video
Day | Night

Suitable for
Personal Cars | Rideshares | Trucks & RVs

Compatible with
Android | Apple Device

A Powerful
Compact & Most
Reliable Dash Cam

180° Rotate Video
Innovative 180 degree upside-down camera rotation option.
G-Sensor
Activated by sudden collision and locks the current video tile as important evidence for further investigation.
Super Night Vision
Can capture clearer videos and photos even in low-light night conditions.
Timelapse
Allows you to capture specific images per second at a much lower rate.

What’s included in my box

360° Suction Motion

360° 3M Sticky Mount

Dual USB Car Charger

2.5 ft USB Data Cable

12 ft USB Car Charging Cable

Quick Start Guide

Wire Trim Tool & 5X Cable Hiding Clip

Invisibile Electrostatic Film

2x Wet Cleaning Pads

128 GB SD Card
ROVE R2-4K Features
4K Ultra HD
Built-in
Wifi 6
Built-in GPS
Supports 512GB Max
Super Capacitor
Sony Starvis IMX335 CMOS Sensor
USB Type-C Input / Output
150° Ultra Wide View Angle
Voice Guidance
F/1.5 Aperture More Light Capture
Built-in G-Sensor
Loop Cycle Recording
Dynamic Wide Range
Super Night Vision
24-HR Auto Trigger Parking Mode



Over 5000+ Smart Drivers
Love Rove Dash Cams
FAQS
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.
2. Now slide the suction mount on the mounting assembly on top of the camera.
3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.
ROVE R2-4K is a plug and play device and ready to record by default settings right out of the box.Setting it up is just quick and easy.
1. Insert the memory card in the camera and then format it before first-time use.2. Now slide the suction mount on the mounting assembly on top of the camera.3. Now plug in the USB cable to the camera and simply press the suction mount on your windshield and while pressing the suction mount, turn the locking knob of suction mount form unlock position to the lock position. This will make the camera mounted on your car's windshield. Then the last step is to connect the 12V cigarette power port to your cigarette lighter.
That's it, the camera is now all set and ready to go.