Introducing the ROVE RS2: A Two-Way Articulating Borescope Built for Real Inspections

ORLANDO, FL, United States. May 20, 2026. ROVE INNOTECH today launches the ROVE RS2 Two-Way Articulating Borescope, its first product in the professional visual inspection category. The RS2 brings ROVE's decade of camera, sensor, and rugged-electronics engineering into the hands of mechanics, plumbers, HVAC technicians, electricians, and serious DIYers.

For mechanics, plumbers, HVAC technicians, electricians, and serious DIYers, the hardest part of an inspection is not always the diagnosis. It is the access. The spark plug well that sits two inches too deep for a finger. The drain line that bends just past the elbow. The HVAC channel buried behind a wall. Until now, most articulating borescopes have been built around an 8.5mm probe, thick enough to leave you guessing about everything you cannot reach.

The new ROVE RS2 Two-Way Articulating Borescope was built to change that. With an ultra-slim 6.2mm semi-rigid probe, true two-way 180° articulation, a sharp 4.3-inch IPS color screen, and dual lighting that covers both your inspection point and your workspace, the RS2 is the inspection tool ROVE wanted in the hands of its customers for years. It is finally ready for yours.

Why ROVE Built the RS2

ROVE INNOTECH is an American consumer electronics brand headquartered in Orlando, Florida, and founded in 2015. We are best known for the ROVE family of dash cams, trusted by over 1,000,000 drivers around the world. A decade of designing rugged camera and sensor hardware taught us one thing above all else: people do not need more features. They need products that work the first time, every time, in the conditions they actually use them in.

"At ROVE, we do not enter a new category just to expand. We enter it because we believe we can build something better than what is already there. The RS2 is the inspection tool we have wanted for our own customers for years, and now it is ready for the world."

Andy ROVE, Founder, ROVE INNOTECH

The RS2 is our first product in the professional visual inspection category, and it carries forward the same engineering discipline that built the ROVE dash cam line. Clarity. Durability. Reliability. No gimmicks.

Who the RS2 Is For

The RS2 was designed for the people who use inspection cameras as part of their job, and for serious DIYers who refuse to settle for the wrong tool. That includes:

• Auto mechanics and technicians inspecting spark plug wells, cylinder walls, engine valves, transmission housings, and tight engine bays.
• Plumbers tracing blockages and inspecting drain lines, P-traps, sewer cleanouts, and water heater interiors.
• HVAC technicians running diagnostics inside ductwork, evaporator coils, blower assemblies, and condensate channels.
• Electricians tracing wiring inside walls, conduit runs, junction boxes, and panel cavities.
• DIYers and homeowners diagnosing leaks behind walls, locating dropped items in vents or drains, and inspecting cars and equipment before a costly repair.

A Feature-by-Feature Tour of the ROVE RS2

True Two-Way 180° Articulation

A fixed probe shows you only what is straight ahead. The RS2's two-way 180° articulation lets you steer the camera tip to where the defect actually is. Articulation is controlled by a precision side-mounted wheel built for one-handed operation, so you can hold the unit steady with your dominant hand and steer with your thumb.

The articulation mechanism is cycle-tested to over 8,000 bends, which means it is built to hold up to the repetitive use that professional service work demands. Whether you are scanning the back side of an engine valve or curling into a P-trap, the RS2 puts the camera where your eye cannot go.

An Ultra-Slim 6.2mm Probe That Gets In Where Others Cannot

This is the headline feature. Most competing articulating borescopes use an 8.5mm probe. The RS2's probe is 6.2mm, which is approximately 27% thinner. That difference is not cosmetic. It is the difference between fitting through a spark plug hole and not. Between reaching the bend in a drain line and stopping short. Between a clean diagnosis and an educated guess.

The probe is semi-rigid, so it holds the shape you bend it into and stays where you place it. Combined with the articulating tip, you get controlled access into the tightest channels in any engine bay, wall cavity, or duct.

A 4.3-Inch IPS Color Screen You Can Actually Read

The RS2 displays its 1080P Full HD inspection feed on a 4.3-inch IPS color screen with wide viewing angles, so you see accurate color and contrast even when you cannot hold the unit straight in front of you. No phone. No app. No Wi-Fi setup. You power it on, you inspect, you record.

Need a closer look? A 2x and 4x digital zoom lets you pull tight on fine cracks, corrosion spots, and small clogs without losing your steady probe position. The IPS panel was specifically chosen so that the image you see on the screen is the image the camera is actually capturing.

Dual Lighting So You Are Never in the Dark

Inspection lighting is usually treated as an afterthought. On the RS2, it was a design priority. Six high-brightness LEDs are integrated directly into the probe tip with four adjustable brightness levels, so you can match the light to the surface (matte engine block, reflective metal pipe, dark drain line) without blowing out the image.

Two additional work lights are built into the rear of the handheld unit, so you can illuminate the workspace around the probe at the same time. This dual lighting setup is uncommon in articulating borescopes at this price point and makes a real difference in dark engine bays, crawl spaces, and utility closets where you are trying to work with one hand on a probe and one hand on a wrench.

IP67 Protection for the Real World

The 6.2mm probe and camera head are IP67 rated for full dust and water ingress protection. That means the RS2 is safe to use in wet drain lines, fuel tanks, oily engine compartments, and dusty workshop environments without worrying about what is going to leak in.

The RS2 also includes a built-in temperature alarm with automatic shutdown that protects the probe during high-heat inspections. This is a real safety feature for industrial users who need to inspect equipment that may not have fully cooled.

Note: The IP67 rating covers the probe and camera head. The handheld main unit (the part with the screen and controls) is not waterproof, so keep it clear of standing water and direct submersion.

All-Day Battery and Built-In Storage

A 2600mAh rechargeable battery delivers up to 4 hours of continuous inspection per charge, which is enough to get through a full shift or a long DIY session without scrambling for a charger. The RS2 recharges over USB Type-C, the same cable that already lives in your truck, your tool bag, and your kitchen drawer.

Every RS2 ships with a free ROVE INSPECT 32GB microSD card already in the package, and the slot supports microSD cards up to 64GB. Capture stills, video, or video with audio. Transfer files to your computer through USB-C or a standard card reader.

What Is in the Box

Every ROVE RS2 ships ready to inspect right out of the box:

• ROVE RS2 Two-Way Articulating Borescope (with 6.2mm semi-rigid probe)
• ROVE INSPECT 32GB microSD card (supports up to 64GB)
• USB Type-C charging cable
• Spare probe cap
• Cleaning cloth
• Durable carrying case
• Full documentation

The RS2 is backed by a 1-year manufacturer warranty and USA-based customer support, the same support that backs the ROVE dash cam line.

ROVE RS2 Specifications at a Glance

ROVE RS2 Borescope FAQs

Is the entire ROVE RS2 waterproof?

The 6.2mm probe and camera head are fully IP67 rated against dust and water ingress, so they are safe to insert into wet drain lines, fuel tanks, and oily engine bays. The handheld main unit that holds the screen and controls is not waterproof, so keep it out of standing water.

Do I need a phone or an app to use the RS2?

No. The RS2 is a fully self-contained inspection tool. The 4.3-inch IPS color screen lives on the handheld unit, so you power it on and start inspecting. There is no app to download, no Wi-Fi to pair, and no phone battery to drain.

What size microSD card does the RS2 support?

The RS2 ships with a free ROVE INSPECT 32GB microSD card, and the slot supports cards up to 64GB. Recordings can be captured as photo, video, or video with audio and transferred via USB-C or a card reader.

How long does the battery last?

The 2600mAh built-in battery delivers up to 4 hours of continuous inspection per charge. The RS2 recharges over USB Type-C, the same standard used by most modern phones, tablets, and laptops.

Can the RS2 see in dark engine bays and crawl spaces?

Yes. The RS2's dual lighting system gives you 6 high-brightness LEDs at the probe tip with four adjustable brightness levels, plus 2 work lights on the rear of the handheld unit to light up the surrounding workspace at the same time.

Is the RS2 suitable for high-heat inspections?

The RS2 includes a built-in temperature alarm with automatic shutdown to protect the probe during high-heat inspections. Always follow the temperature limits listed in the product documentation and allow hot equipment to cool when possible before inserting the probe.

Built and Backed by ROVE

The RS2 is the first ROVE inspection tool, but it carries the same DNA that made ROVE dash cams a trusted name for over a million drivers: rugged camera engineering, real warranty support, and a US-based team you can actually reach. Every RS2 includes a 1-year manufacturer warranty and USA-based customer support.

See What Was Always Hidden. The ROVE RS2 Two-Way Articulating Borescope is available now on Amazon and at rovedashcam.com. Shop on Amazon Visit ROVE